• Home
  • Showing Gundam Parts + WATER DECALS / STICKERS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 241 - 270 of 335 products

Quick View
img
SAVERM8.90

Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam

- Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
PO PriceRM27.00

HG 1/100 VF-19 Fire Valkyrie with Sound Booster Decals

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  MAY 2024
Estimate arrival : JUN 2024

- P-O Price RM27
- Deposit RM10, Balance RM17
- We will inform to make balance RM17.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

These decals are made especially for Bandai's 1/100-scale HG model kit of the VF-19 Fire Valkyrie with Sound Booster! Order yours today!

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Add to cart
Quick View
img
SAVERM7.00

Tamiya Mark Fit Strong 40ML

【 Perfect Decal Application 】　 　


Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

≪How to use≫
1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
6. Allow the decal to completely dry.

RM18.00
RM18.00 Request Stock
Quick View
img
SAVERM5.80

[WATER DECAL] MG Strike Freedom

  • water decal for 1/100 strike freedom gundam
  • not pre-cut like the bandai slide water decal.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM3.90

[Water Decal] HG Astray Red Frame Kai

  • water decal for gundam astray red frame gundam kai scale 1/144
  • not pre-cut like the bandai slide water decal.
  • extra touch of details for modeling kits.

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG Gundam 00 Raiser

  • water decal for 00 RAISER model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG ZGMF-X20A STRIKE FREEDOM Model Kit

  • Third Party Water decal for RG Strike Freedom model kit scale 1/144.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.89

[Water Decal] MG ZGMF-X42S Destiny Gundam Water Decal

- Water decal for HG / MG warning sign water decal - RED color
- Not pre-cut like the bandai slide water decal
- Extra touch of details for modeling kit

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.89

[WATER DECAL] MG PMX-003 The-o

[WATER DECAL] MG PMX-003 The-o

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM15.48

[Water Decal] Z260 MG Duel Assault Gundam GAT-X102 Water Decal

- Water decal for MG Duel Assault Gundam 
- Not pre-cut like the bandai slide water decal.
- Extra touch of detail for modeling kits

RM14.50
RM14.50 Request Stock
Quick View
img
SAVERM5.89

[Water Decal] HG RX-0 Unicorn Water Decal

  • Water decal for HG RX-0 Unicorn water decal
  • not pre-cut like the bandai slide water decal.
  • extra touch of detail for modeling kits

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM4.99

[Water Decal] MG 1/100 Aile Strike ver RM

  • Water decal for HG / MG warning sign water decal - RED color
  • Not pre-cut like the bandai slide water decal
  • Extra touch of details for modeling kit

RM13.00
RM13.00 Request Stock
Quick View
img
SAVERM23.88

[Water Decal] Z105 RG MSZ-006 ZETA Gundam

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM14.88

[Water Decal] RG RX-178 MK-II MK2 AEUG Gundam

Water slide decals to be used with various model kits. Contains markings that can be used with its specific character or at your discretion for customizing your own kits!

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM11.88

[Water Decal] RG Justice Gundam

Water decal for RG Justice Gundam
Not pre-cut like the bandai slide water decal.
Extra touch of detail for modeling kits

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM17.18

MG 00 Raiser Gundam Silver Decal

  • silver color decal for MG 00 Raiser Gundam

RM18.80
RM18.80 Request Stock
Quick View
img
SAVERM20.98

Water Decal for RG 1/144 Zgok Bronze Gold Color

- Water Decal for RG 1/144 Zgok Bronze Gold Color
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Request Stock
Quick View
img
SAVERM11.18

[Water Decal] MG RX-93-2 Hi-V Gundam Titanium Gold Mark

  • Titanium Gold Mark Decal
  • Water decal for MG RX-93-2 Hi-V Gundam 
  • Not pre-cut like the bandai slide water decal
  • Extra touch of detail for modeling kits

RM18.80
RM18.80 Request Stock
Quick View
img
SAVERM11.18

[Water Decal] MG RX-93-2 Hi-V Gundam Titanium Silver Mark

  • MG RX-93-2 Hi-V Gundam Titanium Silver Mark Decal

RM18.80
RM18.80 Request Stock
Quick View
img
SAVERM4.90

EVO The Witch From Mercury HG 1/144 Gundam Lfrith Jiu Fluorescence Water Decal

EVO HG Gundam Lfrith Jiu Fluorescence Water Decal 

Brand : Evolution Studio
Model : for HG Gundam Lfrith Jiu
Scale : 1/144
Type : Fluorescence 

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM11.00

[Da Lin] Water Decal for PG 1/60 Perfect Strike Gundam

[Da Lin] Water Decal for PG 1/60 Perfect Strike Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for [Da Lin] Water Decal for PG 1/60 Perfect Strike Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
RM16.00 Request Stock
Quick View
img
SAVERM11.00

[Water Decal][BANDAI] Gundam Decal No#133 Mobile Suit Gundam: The Witch from Mercury 1

New to the \"Gundam Decal\" line up comes a sheet of water transfer decals that can be used for 1/144 scale!

Versatile water transfer decals for the latest Gundam series, \"Mobile Suit Gundam: The Witch from Mercury\".
Decals for \"Gundam Aerial\", \"Gundam Lubris\", and \"Begilbeu\" are included.

[Accessories]:
- Water transfer type decal x 1

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM14.90

Bandai Water Decal for Macross Frontier HG 1/100 YF-29 Durandal Valkyrie (for the Maximilian Genus Custom Full Set Pack)

This is a sheet of water-slide decals, dry transfers, or self-adhesive stickers for use in detailing anime or science-fiction kits.

This set of decals was made especially for Bandai's 1/100 HG YF-29 Durandal Valkyrie (Maximilian Genus Custom) Full Set Pack model kit! Decals are included for all three forms: Battroid, Gerwalk and Fighter. Order yours today!

RM27.00
RM27.00 Request Stock
Quick View
img
SAVERM4.90

EVO The Witch From Mercury HG 1/144 Gundam Aerial Lfrith Mirasoul Flight Unit Chuchu's Demi Trainer Fluorescence Water De

EVO The Witch From Mercury HG 1/144 Gundam Beguir-Beu Michaelis Beguir-Pente Fluorescence Water Decal

Brand : Evolution Studio
Model : for HG Aerial, Lfrith, Mirasoul Flight Unit, Chuchu's Demi Trainer, Demi Trainer
Scale : 1/144
Type : Fluorescence 

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM4.90

EVO The Witch From Mercury HG 1/144 Gundam Aerial Rebuild Pharact Heindree Zowort Tickbalang Fluorescence Water Decal

EVO The Witch From Mercury HG 1/144 Gundam Aerial Rebuild Pharact Heindree Zowort Tickbalang Fluorescence Water Decal

Brand : Evolution Studio
Model : for HG Aerial Rebuild , Pharact , Heindree , ,Zowort , Tickbalang
Scale : 1/144
Type : Fluorescence 

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for Daban 8818 MG 1/100 Barbatos

[Da Lin] Water Decal for Daban 8818 MG 1/100 Barbatos

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Daban 8818 MG 1/100 Barbatos
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM11.00

[Water Decal][BANDAI] Gundam Decal (RG) for Hi-Nu Hi-v Gundam #132

Decals the marking of RG Hi-Nu Gundam model kits
Brand : Bandai

  • Cut out desired decal.
  • Dip decal and backing in water. Leave submerged 10-30 seconds.
  • Remove decal from water with tweezers.
  • Gently lift decal off of paper backing with tweezers.
  • Place decal in desired location on model, adjusting with cotton swab if necessary.
  • Apply Mark Setter or Mark Softer as needed.

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM13.90

Macross Frontier HG 1/100 YF-21 Water Slide Decals

These decals are made especially for Bandai's 1/100-scale HG YF-21! 
It'll make your build even more amazing when you apply these high-quality waterslide decals to your finished kit. Order yours today! 

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

RM28.00
RM28.00 Request Stock
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for PG Unleashed 1/60 RX-78-2 Gundam

[Da Lin] Water Decal for PG Unleashed 1/60 RX-78-2 Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for [Da Lin] Water Decal for PG Unleashed 1/60 RX-78-2 Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM4.90

EVO The Witch From Mercury HG Gundam Calibarn Fluorescence Water Decal

EVO HG Gundam Caliban Fluorescence Water Decal 

Brand : Evolution Studio
Model : for HG Caliban
Scale : 1/144
Type : Fluorescence 

RM10.00
RM10.00 Request Stock

Showing 241 - 270 of 335 products